How To Cut Aluminum Sheet With Angle Grinder. Use a hacksaw, and use kerosene (or petroleum) for lubricating (and to prevent clogging the hacksaw teeth). Bring the cutting wheel into contact with the metal and allow the weight of the angle grinder to do the work.
An angle grinder can be perfectly used for cutting sheet metal. Holding the tool firmly with both of your hands, set down the disc. Bring the cutting wheel into contact with the metal and allow the weight of the angle grinder to do the work.
Table of Contents
An Angle Grinder Can Be Perfectly Used For Cutting Sheet Metal.
Tin snips or aviation snips are one of the most widely used tools to cut sheet metals. Then place the metal sheet on stable support and lock. After reading the above article, i am sure you can also easily cut down the heavy metal sheets.
It Can Also Minimize Downtime And Labor Costs.
Once you have done that it is time to begin the process. However, keep in mind that you must opt for an abrasive metal disc to cut through these components. For this, you have to fix a metal cutoff wheel to your grinder.
Position The Cutting Wheel At A 90 Degree Angle To Your Cut Mark.
Tin snips and aviation snips look like. After that, insert the metal disc into the grinder. Position the cutting wheel edge on the waste side of the material to be cut.
The Next Step Is To Fix The Metal And Mark The Cut With A Permanent Marker.
Lift up slightly from the point of contact. Ensure that the metal disc is correctly installed and fastened as well. Before you can start cutting metal with an angle grinder, you need to take some time to gather all of the proper equipment.
S Satc 25 Pcs 3 Inch Cut Off Wheels 3″X1/16″X3/8″ Cutting Wheel Die Grinder Cut Off Blades Fits Angle Grinder Air Tool.
Now, plug in the angle grinder with electricity and turn on the angle grinder to cut the steel pipe. Roughly an inch or two will suffice. Besides, can you use an angle grinder to cut aluminium?